 | |
| Teknetics T2 |
|
|
 |
Teknetics
T2
Available NOW!
USER INTERFACE: Menu-driven. Entire menu is always visible. Where you are in the menu is always indicated.
ALL METALS MODE: first derivative (single-filter) motion.
DISCRIMINATION MODE: second derivative (two-filter) motion, with selection of target identification tones and sampling methods.
PINPOINT FEATURE: trigger-actuated, fully static (non-motion) with variable pitch.
GROUND CANCELLATION: trigger-actuated computerized, or manual. VISUAL
TARGET I.D.: 0-99 plus eight target category indicators.
MINERALIZATION READOUT: ground cancellation phase 0-99, and mineral concentration bar graph.
FREQUENCY SHIFTING: seven selections (to avoid electrical interference)
PERFORMANCE OPERATING PRINCIPLE: VLF induction balance
OPERATING FREQUENCY: nominal 13 kHz, quartz crystal timing reference
BASIC SENSITIVITY: 5 x 109 root Hertz (detectivity) LAG COEFFICIENT: 70 milliseconds
REACTIVE OVERLOAD: approximately 10,000 micro-cgs units (volume susceptibility)
RESISTIVE OVERLOAD: approximately 1,200 micro-cgs units (volume susceptibility)
GROUND CANCELLATION RANGE: From ferrite to salt, inclusive DISCRIMINATION
GROUND SUPPRESSION: combination of second and third order methods ID
GROUND SUPPRESSION: third order
BATTERY LIFE: typically 40 hours with good quality alkalines, somewhat less with NiMH rechargeables.
OPERATING TEMP RANGE: -4 to +122 degrees F (-20 to +50 degrees C)
OPERATING HUMIDITY RANGE: 0-90% non-condensing
